Go to content

POWER

IN MOTION

Home | Transport- and lifting technology | Port Operations

PORT OPERATIONS WITH RAIL AND ROAD CONNECTIONS

Heavy-load terminal for combined transport


By establishing heavy load ports in Linz (Austria), at Albern harbour in Vienna and in Krefeld (Germany), we have fully integrated Europe's two most important waterways – the Danube and the Rhine – into our transport logistics system. In addition to the water route, all three ports also boast rail and road connections. 

The over 100 metres-long and 17 metres-wide docks in Linz can take even the largest heavy goods vessels on the Danube. For the transfer, there are two portal cranes with load-bearing capacities of 400 and 200 tons. With both combined, loads of up to 600 tons can be transferred. 

Vienna’s Albern Port – with its manipulation and storage capacity of some 4,000 square metres – is another multi-modal heavy load terminal in our portfolio. The facility allows for the transfer of goods weighing up to 450 tons.

As the operator of the port in Krefeld, we are a full service provider on the Rhine too, taking care of goods transportation, handling, transshipment and storage. A storage and handling area covering 40,000 square metres and a transshipment capacity of 500 tons give our customers ultimate flexibility and the peace of mind of knowing that our logistics processes make good economic and ecological sense. 

Felbermayr Schwerlastterminals mit Anbindung an den Verkehrsweg Wasser, Strasse und Schiene, sowie Lagerfläche
SHARE
© Felbermayr Holding GmbH · Machstraße 7 · A-4600 Wels · www.felbermayr.cc
21.02.2019